MV2120 Stock U-Boot Variables

From NAS-Central HP Wiki
Jump to: navigation, search

U-Boot 1.1.4 (Oct 12 2007 - 12:30:28) Marvell version: 2.3.11_HP_1_3_1_Built@HP

baudrate=115200
loads_echo=0
rootpath=/mnt/ARM_FS/
cpuName=926
bootargs=console=ttyS0,115200
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_end=:::DB88FXX81:egiga0:none
image_name=uImage
ethaddr=00:0a:e4:83:a5:2f
eth1addr=00:00:00:00:51:82
usb0Mode=host
usb1Mode=host
serialNo=5561n01d01g72800029j0sb
manufacturer=HP
enaPost=No
autoload=no
runintime=13000
loadAddr=0x400000
deviceName=HP P2 NAS
modelNumber=Hewlett-Packard (HP) PyramidPeak NAS System
bootcmd_nfs=tftpboot $(loadAddr) $(image_name);setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip)$(bootargs_end); bootm  0x400000;
sysRaid=yes
netretry=no
rcvrip=169.254.100.100
ethact=egiga0
BOOT_MODE=normal
mfgtest_state=final_tested_ok
bootargs_root=root=/dev/nfs rw console=ttyS0,115200
bootcmd=bootext2 0,1:1,2 0x400000 /boot/uImage /dev/sda /dev/sdb
serverip=192.168.1.100
ipaddr=192.168.1.125
stdin=serial
stdout=serial
stderr=serial
enaDebugLed=yes
enaMonExt=no
enaFlashBuf=yes
enaCpuStream=no
bootdelay=3
disaMvPnp=no
overEthAddr=no